How To Set Up

Step 1:Connect tap
Step 2: Connect hose
Step 3: Connect adapter
Step 4: Tap set up
Step 5: Cut hose as you wish
Step 6: Use a tee joint
Step 7: Creating up branch
Step 8: Setting up branch
Step 9: Setting up dripper
Step 10: Connect spike
Step 11: Install dripper
Step 12: Start watering

Why do you need a Timer

Timer makes it possible to automatically water your plants no matter you are at home or not. Set up you own watering pattern, you will never need to do the watering by yourselves. And your plants will never suffer from dehydration.

Timer Connection

Timer fits standard 3/4" thread. female thread on the top, male thread on the bottom. Also we give a extra option of 1/2" nozzle connection.

Timer Usage:

First, open the battery compartment below the control panel.
Second, Put AAA batteries in the battery compartment.
Third, adjust the control panel to the watering pattern you wanted.
Finally, Cover the panel with the cover to avoid the water from coming inside the control panel.

Why Do you need a filter:

Water contains minerals that would attached to the inner wall of the hose which will block the water when it accumulates failing the whole system. However, with filter, no need to worry about the system failing anymore. Keep everything but water out from getting into the system. Making the system clean and durable.

Why Do you need a pressure regulator:

When setting up a irrigation system, it always the problem when the hoses is not so fixed and water pressure is high. Some times the hose pops out because of the high water pressure.

Our Pressure regulator would keep the water pressure in certain amount. and will not burst the hose out. Making the system stable all the time